User`s guide

4. Press Scroll ( or ) to display the country you want and then press Select ( ).
5. Press Cancel ( ) to return to the Standby mode.
Power Save Mode
The Power Save mode enables your printer to reduce power
consumption when it is not in actual use. You can enable this
mode by selecting the duration for which the printer waits
after a job is printed before it switches to a reduced power
state.
1. Press Scroll ( or ) to highlight Setup and then press Select ( ).
2. Press Scroll ( or ) to highlight Machine Setup and then press Select ( ).
3. Press Scroll ( or ) to highlight Print Power Save and press Select ( ).
4. Press Scroll ( or ) to display the time settings you want.
The available options are 5, 10, 15, 30, 60 and 120
(minutes).
The factory default setting is 30 minutes.
5. Press Select ( ) to save the selection.
6. Press Cancel ( ) to return to the Standby mode.
Setting the Time and Date
The time and date are printed on all faxes.
To set the time and date:
1. Press Scroll ( or ) to highlight Setup and then press Select ( ).
2. Press Scroll ( or ) to highlight Machine Setup and then press Select ( ).
3. Press Scroll ( or ) to highlight Date & Time and then press Select ( ).
NOTE: It may be necessary to reset the correct time and date if loss of power to the printer occurs.
Page 2
4
of 5
2