User guide

Partial, scrolling, or incorrectly displayed image

Press the
Resync
button on the remote control or the control panel.

If you are using a Dell portable computer (for other computers consult your owner's
manual):
1. Set the resolution of the computer to XGA (1024 x 768):
1a) Right click on the unused portion of your Windows desktop-»
Properties-» Settings tab.
1b) Verify the "Screen area" slide bar is set to 1024x 768 pixels for the
external monitor port.
2. Press .

If you experience difficulty in changing resolutions or your monitor freezes, restart all
the equipment and the projector.
The screen does not display your presentation

If you are using a Dell portable computer, press .
Image is unstable or flickering

Adjust the tracking in the OSD
Computer Image
tab.
Image has vertical flickering bar

Adjust the frequency in the OSD
Computer Image
tab.
Image color is not correct

If your graphic card output signal is "sync on Green", and you would like to display
VGA at 60Hz signal, please go into "OSD--> Management --> Signal Type" and
select "RGB".

Run "Self-diagnostic test" (see " Self-diagnostic for video ") for preliminary diagnostic
on image color problem. Ensure that the colors of the test pattern are correct.
Image is out of focus

Adjust the focus ring on the projector lens.

Ensure that the projection screen is within the required distance from the projector
(3.9ft [1.2m] to 39.4ft [12m]).
The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect ratio to full screen with a 4:3 (letter-box)
default setting.