User guide

Power Saving
Use this function to select the power saving delay period. Press "Yes" to go into the
"set time" sub menu.
Set Time (Min)
Set the power saving delay period as you prefer. When the projector is not receiving
an input signal for the selected period of time, the projector will automatically enter
power saving mode, and turn off the lamp. After a one-minute cooling period, the
projector will turn back on with detection of an input signal
or by pressing the "Power"
button. After two hours the projector will turn off and must be turned on by pressing
the power button on the control panel or remote.
Auto Source
The projector will always automatically search for available input signals when
Auto
Source
is
On
, which is the default setting. Press the
Source
button with
Auto
Source On
to automatically search for the next available input signal. Selecting
Off
will lock on the current input source. Set
Auto-Source
to
Off
to step through the
different input signals manually.
Eco Mode

Select
On
to operate the projector in lower power (150 Watts) for providing
longer lamp life and quiter operation with dimmer luminance output on the
screen.

Select
Off
to resume the operation in normal power (200 Watts).
Language Menu