User`s guide
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
358 Understanding Printer Messages
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section22.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
016-920 Press the
(Set) button and try again.
016-921
016-922
016-930 The device is not supported. Remove it from the front USB port.
016-931 The USB hub is not supported. Remove it from the front USB port.
024-910 Reload the specified paper on the standard 250-sheet tray.
024-911 Reload the specified paper on the optional 250-sheet feeder.
024-914 Reload the specified paper on the SSF.
024-946 Insert the standard 250-sheet tray.
024-947 Insert the optional 250-sheet feeder.
027-452 Change IP address to avoid duplication. Turn off the printer, and turn it on
again.
027-446
042-700 Wait for a while until the printer cools down.
071-100 Remove the standard 250-sheet tray and jammed paper. Open and close
the front cover.
071-920 Set side 2 of the sheet to the standard 250-sheet tray.
071-921 Press the
(Set) button.
072-100 Remove the optional 250-sheet feeder and jammed paper. Open and close
the front cover.
072-921 Press the
(Set) button.
072-920 Set side 2 of the sheet to the optional 250-sheet feeder.
072-101 Remove the standard 250-sheet tray or the optional 250-sheet feeder, and
remove the jammed paper. Open and close the front cover.
072-908 Remove the standard 250-sheet tray or the optional 250-sheet feeder, and
remove the jammed paper. Open and close the front cover.
075-101 Open the front cover and remove the jammed paper, and then open and
close the front cover.
075-102 Pull the jammed paper out of the SSF. Open and close the front cover.
072-921 Press the
(Set) button.
075-922 Remove the paper from the SSF.
075-923 Pull the paper out of the SSF. Reload the paper in the SSF.
077-300 Close the front cover.