User`s guide
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
Understanding the Printer Menus 315
Toner Refresh
Purpose:
To clean the toner in each toner cartridge.
Val u e s:
Drum Refresh
Purpose:
To clean the surface of the PHD unit.
Val u e s:
Reset Defaults
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and
rebooting the printer, all the menu parameters are reset to their default values.
Val u e s:
Init PrintMeter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the
meter count is reset to zero.
Val u e s:
Clear Storage
NOTE: Clear Storage feature is available only when the optional 512 MB memory
module is installed.
Yellow, Magenta,
Cyan, Black
Are You
Sure?
Press the
(Set)
button
to clean the toner in the
selected toner cartridge.
Are You Sure? Press the
(Set)
button
to clean the surface of the PHD unit.
Are You Sure? Press the
(Set)
button
to initialize the system parameters.
Are You Sure? Press the
(Set)
button
to initialize the print meter.