User`s guide
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
Understanding the Printer Menus 295
Manual
Setup
Enter (SSID) Specifies a name to identify the wireless
network. Up to 32 alphanumeric characters can
be entered.
Infra-
structure
Select when you configure the wireless setting through the
access point such as a wireless router.
No Security Specifies No Security to configure the wireless
setting without specifying a security method
from WEP, WPA-PSK-TKIP, and WPA-PSK-
AES.
WEP(64Bit) Specifies the WEP 64 bit key to use through the
wireless network. Up to 10 hexadecimal
characters can be entered.
Transmit
Key
Specifies the transmit key from
WEP Key 1, WEP Key 2, WEP
Key 3, and WEP Key 4.
WEP(128Bit) Specifies the WEP 128 bit key to use through
the wireless network. Up to 26 hexadecimal
characters can be entered.
Transmit
Key
Specifies the transmit key from
WEP Key 1, WEP Key 2, WEP
Key 3, and WEP Key 4.
WPA-PSK-
TKIP
Select to configure the wireless setting with the
security method of WPA-PSK-TKIP.
PassPhrase
Entry
Specifies the passphrase of
alphanumeric characters from 8
to 63 only when WPA-PSK-
TKIP is selected for Encryption.
WPA2-PSK-
AES
Select to configure the wireless setting with the
security method of WPA2-PSK-AES.
PassPhrase
Entry
Specifies the passphrase of
alphanumeric characters from 8
to 63 only when WPA-PSK-AES
is selected for Encryption.