User`s guide
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
196 Dell Printer Configuration Web Tool
LLTD
Purpose:
To specify the maximum number of devices.
Values:
Wireless LAN
NOTE: Wireless LAN feature is available only when the printer is connected
using the wireless network.
Purpose:
To configure the detailed setting for the wireless network. To use the wireless
adapter, be sure to disconnect the network cable.
Administrator
Account
Account
Enabled
Select the check box to enable the administrator
account.
User Name Enters the user name of the administrator account.
Authentication
Password
Sets the authentication password of the
administrator account using 8 to 32 alphanumeric
characters.
Re-enter
Authentication
Password
Confirms the set password.
Privacy
Password
Sets the privacy password of the administrator
account using 8 to 32 alphanumeric characters.
Re-enter
Privacy
Password
Confirms the set password.
Print Drivers /
Remote Client
Account
Account
Enabled
Select the check box to enable the print drivers and
remote client account.
Reset to default
Password
Click to reset the password for the print drivers and
remote client account to default.
Maximum number of
Device
Sets the maximum number of device from 64 to 1,024.