User`s guide
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
Dell Printer Configuration Web Tool 193
SNMP
Purpose:
To configure the detailed settings of SNMP.
Val u e s:
SNMP v1/v2c
Purpose:
To edit the detailed settings of SNMP v1/v2 protocol.
To enter this page, click Edit SNMP v1/v2 Properties in the SNMP page.
Val u e s:
Printer Name Sets the printer name up to 63 alphanumeric characters and symbol
sets. The original setting will remain valid if no input is made.
SNMP
Configuration
Enable SNMP
v1/v2c
Protocol
Select the check box to enable the SNMP v1/v2c
protocol.
Edit SNMP
v1/v2c
Properties
Click to display SNMP v1/v2c page and to edit the
setting of SNMP v1/v2c protocol from the page.
Enable SNMP
v3 Protocol
Select the check box to enable the SNMP v3
protocol.
Edit SNMP v3
Properties
Click to display SNMP v3 page and to edit the
setting of SNMP v3 protocol from the page.
You can click this item only when SSL
communication is enabled.
Community
Name
Community
Name (Read
only)
*1
Sets the community name to access (read only) data
using up to 31 alphanumeric characters.
The original setting will remain valid if no input is
made. Characters entered for community name in
the previous settings will not be displayed on the
screen. The default Read Community is public.