User`s guide

188 Dell Printer Configuration Web Tool
To configure the IP Filter feature, enter an IP address to be filtered in the
Address field and the Subnet Mask in the Address Mask field. Enter a numeric
value between 0 and 255 in each field. "*" is appended to the current value.
IP Filter Setup Procedure
You can set up to a maximum of five items and the first item set takes priority.
When setting multiple filters, enter the shortest address first followed by a
slightly longer address, a longer address and so on.
Enabling Printing From a Specified User
The following describes the procedure to enable printing only from the
"192.168.100.10" IP address.
1
Click the first column of the Access List row 1 .
2 Enter " 192.168.100.10 " in the Address field and
"
255.255.255.255 " in the Address Mask field.
3 Select Permit .
4 Click Apply New Settings .
Disabling Printing From a Specified User
The following describes the procedure to disable printing only from the
"192.168.100.10" IP address.
1
Click the first column of the Access List row 1 .
2 Enter " 192.168.100.10 " in the Address field and
"
255.255.255.255 " in the Address Mask field.
3 Select Reject .
HTTP Port Number Sets the port number to 80 or from 8,000 to 9,999.
Simultaneous
Connections
Displays the maximum number of simultaneous
connections.
Connection
Time-Out
Sets the connection time-out period from 1 to 255 seconds.
Telnet Password Sets the password for Telnet.
Re-enter
Password
Confirms the set password.
Connection
Time-Out
Sets the connection time-out period from 1 to 1,000 seconds.