User`s guide
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
166 Dell Printer Configuration Web Tool
Power Saver Time - Sleep Sets the time taken by the printer to enter Sleep
mode after it finishes a job.
Power Saver Time - Deep Sleep Sets the time taken by the printer to enter Deep
Sleep mode after it has entered Sleep mode.
Auto Reset Sets the amount of time before the printer
automatically resets the settings on the operator
panel to the defaults when no additional settings are
made.
Fault Time-Out Sets the amount of time the printer waits before
canceling a job that stops abnormally.
Job Time-Out Sets the amount of time the printer waits for data to
arrive from the computer.
Control Panel Tone Sets the volume of the tone that is emitted when the
operator panel input is correct, or disables the tone.
Invalid Key Tone Sets the volume of the tone that is emitted when the
operator panel input is incorrect, or disables the
tone.
Machine Ready Tone Sets the volume of the tone that is emitted when the
printer becomes ready, or disables the tone.
Job Completed Tone Sets the volume of the tone that is emitted when a
job is complete, or disables the tone.
Fault Tone Sets the volume of the tone that is emitted when a
job ends abnormally, or disables the tone.
Alert Tone Sets the volume of the tone that is emitted when a
problem occurs, or disables the tone.
Out of Paper Tone Sets the volume of the tone that is emitted when the
printer runs out of paper, or disables the tone.
Low Toner Alert Tone Sets the volume of the tone that is emitted when the
toner is low, or disables the tone.
Auto Clear Alert Tone Sets the volume of the tone that is emitted 5 seconds
before the printer performs auto clear, or disables
the tone.
All Tones Sets the volume of all the alert tones, or disables all
the tones.