User`s guide
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
Dell Printer Configuration Web Tool 159
Machine Ready
Ton e
Displays the volume of the tone that is emitted
when the printer becomes ready. Off indicates
that the tone is disabled.
Job Completed
Ton e
Displays the volume of the tone that is emitted
when a job is complete. Off indicates that the
tone is disabled.
Fault Tone Displays the volume of the tone that is emitted
when a job ends abnormally. Off indicates that
the tone is disabled.
Alert Tone Displays the volume of the tone that is emitted
when a problem occurs. Off indicates that the
tone is disabled.
Out of Paper
Ton e
Displays the volume of the tone that is emitted
when the printer runs out of paper. Off indicates
that the tone is disabled.
Low Toner Alert
Ton e
Displays the volume of the tone that is emitted
when the toner is low. Off indicates that the tone
is disabled.
Auto Clear Alert
Ton e
Displays the volume of the tone that is emitted 5
seconds before the printer performs auto clear.
Off indicates that the tone is disabled.
All Tones Displays the volume of all the alert tones. Off
indicates that all the tones are disabled.
mm / inch Displays the measurement unit that is used on
the operator panel screen.
Default Paper
Size
Displays the default print paper size.
Auto Log Print Displays whether to automatically print a job
history report after every 20 jobs.
Print ID Displays where to print a user ID on the output
paper.
Print Text Displays whether the printer outputs PDL (Page
Description Language) data (which is not
supported by the printer) as text when the printer
receives it.
Banner Sheet
Insert Position
*1
Displays where to insert a banner sheet in the
output paper.