User's Manual

Jam/Alignment Problems

The top and side margins are incorrect.

The color registration is out of alignment.
Does the noise generated from the printer match with the noise from the Play of Sound button?
3
1. On the Machine Check page, select Dispense Motor Check (Yellow), Dispense Motor Check (Magenta), Dispense
Motor Check (Cyan), or Dispense Motor Check (Black) from the drop-down list box, and click the Start button.
2. Click the Play of Sound button to check the motor sound.
3. Repeat steps 1 and 2 to perform Dispense Motor Check for the rest of the toner cartridges.

NOTE: You can perform Dispense Motor Check for CMYK in any order you desire.

NOTE: Do not check the operation of the dispense motor repeatedly.
Does the noise generated from the printer match with the noise from the Play of Sound button?
Contact
Dell.
Go to
action 4.
4
1. Reinstall the fuser.
2. Perform action 3 again.
Does the noise generated from the printer match with the noise from the Play of Sound button?
Contact
Dell.
Go to
action 5.
5
1. Reinstall the PHD unit.
2. Perform action 3 again.
Does the noise generated from the printer match with the noise from the Play of Sound button?
Contact
Dell.
Go to
action 6.
6
1. Reinstall the toner cartridges.
2. Perform action 3 again.
Does the noise generated from the printer match with the noise from the Play of Sound button?
Contact
Dell.
Contact
Dell.
NOTE: Some of the following procedures that use the Tool Box can also be performed using the operator panel or Dell Printer Configuration Web Tool.
For information on how to use the operator panel and Dell Configuration Web Tool, see "Understanding the Menus" and "Dell Printer Configuration Web
Tool".

Action

Yes

No
1
Ensure that the margins are set correctly on the application being used.
Is the problem resolved?
The task is complete.
Contact Dell.

Action

Yes

No
1
Execute auto color registration adjustment.
1. Launch the Tool Box, and click Registration Adjustment on the Printer Maintenance tab.
2. Click Auto Correct under Color Registration Adjustments.
Is the problem resolved?
The task is
complete.
Go to action
2.