Manualshelf

Personal Computer User Manual

ManualsBrandsDell ManualsDesktop2010
41424344454647484950
Power Switch Module 45
8
Slide the holder along with the hard drive activity light and cable out
through the front of the computer.
Replacing the Power Switch Module
1
Slide the power switch module through the slot on the front panel.
2
Press the holder and gently snap it into the front panel until it clicks into
place.
3
Gently push the hard drive activity light into its holder.
4
Connect the power switch module cable to the power switch module
connector (FP1) on the system board.
5
Replace the hard drive (see "Replacing a Hard Drive" on page 33).
6
Replace the front bezel (see "Replacing the Front Bezel" on page 20).
7
Replace the computer cover on both the sides (see "Replacing the
Computer Cover" on page 16).
book.book Page 45 Monday, November 19, 2012 11:42 AM