User`s guide

Setting Up Your Monitor: Dell 1907FP Flat Panel Color Monitor User's Guide
file:///T|/htdocs/monitors/1907FP/en/setup.htm[8/2/2012 8:06:43 PM]
Audio
(optional)
You can select to have the audio on or off when the monitor is in power saving mode.
Yes — enables audio
No — disables audio (default)
NOTE: When the Dell Soundbar is not properly connected to the monitor, the audio menu is not available.
Factory
Reset:
Reset the OSD menu options to the factory preset values.
Exit — Select to exit out of Reset to Factory Settings menu without resetting any OSD options.
Position Settings Only — Change the settings for Image Position back to original factory settings.
Color Settings Only — Change the Red, Green, and Blue settings back to their original factory settings and set the default setting
for Normal Preset.
All Settings — Change all the user-adjustable settings including color, position, brightness, contrast and OSD hold time to the
factory defaults. The language of the OSD does not change.
DDC/CI: — Enable the DDC/CI control function.
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable
via software on your PC.
Default is "Enable". You can disable this feature by selecting "Disable".
For best user experience and optimum performance of your monitor, keep this feature enabled.
NOTE: If user select "Disable", display Warning message box as below. Select "Yes" disable
DDC/CI and return to "Reset to Factory Settings" menu. Warning message time-out in 20