User`s guide

Setting Up Your Monitor: Dell 1907FP Flat Panel Color Monitor User's Guide
file:///T|/htdocs/monitors/1907FP/en/setup.htm[8/2/2012 8:06:43 PM]
1. Turn off your computer and disconnect the power cable.
2. Connect either the white DVI or blue VGA cables to the connectors on the computer and the monitor.
3.
Connect the USB cable that was included with your monitor to the computer and the upstream USB connector on the monitor. Once this cable is connected to the
computer and the monitor, you can use the USB connectors on the monitor.
4. Connect any USB devices.
5. Connect the power cables
6.
Turn on your monitor and computer. If you do not see an image, push the input select button and ensure the correct input source is selected. If you still do not see an
image, see Troubleshooting your monitor
.
Using the Front Panel
Use the buttons on the front of the monitor to adjust the image settings.
Use the Input Select button to select between two different video signals that may be connected to your monitor.
NOTE: The floating 'Dell Self-test Feature Check' dialog appears on a black background if the monitor
cannot sense a video signal. Depending upon the selected input, one of the dialogs shown below will