Owner`s manual

56 Using Your Multi-Function Printer
4 Press Scroll ( or ) to select the binding option you want and press Select ().
•
Off : Prints in normal mode.
•
Long Edge : Prints pages to read like a book.
•
Short Edge : Prints pages to read by flipping over like a note pad.
5 If necessary, customize the copy settings including the number of copies, copy size, contrast, and
image quality by using the Copy menus.
6 Press Start ( ) to begin copying.
Your printer prints on both sides of paper automatically.
Changing the Default Settings
The copy options, including contrast, image quality, copy size, and the number of copies, can be set to
the most frequently used modes. When you copy a document, the default settings are used unless
changed using Copy menus.
NOTE: While you set copy options, pressing Cancel ( ) cancels the changed settings and returns to the default
status.
To create your own default settings:
1 Press Scroll ( or ) to highlight Copy and press Select ().
OR
Press
Scroll ( or ) to highlight Menu and press Select ()
2 Press Scroll ( or ) to highlight Copy Defaults and press Select ().
3 Press Scroll ( or ) to scroll through the setup options.
4 Press Select ( ) to access the option you want to set.
5 Change the setting using the Scroll ( or ) or enter the value using the number keypad.
6 Press Select ( ) to save the selection.
7 Repeat steps 3 through 6, as needed.
8 Press Cancel ( ) to return to Standby mode.
Downloaded from ManualsPrinter.com Manuals