Service manual

Service Manual
Precautions
5-32
6. If necessary, release the three E-Rings securing the
Gears (T2 Idle, Retard, Idle) and then remove the
Gears from the Feed Bracket, as shown below .
Notice : Be aware of the E-Rings to ensure they are not
lost.
7. Remove the Clutch Unit, as shown below .
8. Pull up the Feed1 Roller from the Bushing, as shown
below.
T2 Idle Gear
Retard Gear
Idle Gear
E-Ring
Bracket
Feed Shaft
Feed1 Gear Ass'y
Clutch Unit
Feed1 Roller