Specifications

BIG-IP Software on the Dell PowerEdge 1655MC Blade Server System
BIG-IP® Platform Guide for the Dell® PowerEdge 1655MC Blade Server System 1 - 7
To use an existing DHCP server on the subnet
a) Select yes at the prompt. This avoids possible conflicts and
automatically completes the PXE server configuration.
The host displays the settings you selected, and prompts you to
accept or reject them.
b) If the settings are correct, type yes to accept them. If the settings
are not correct, type no, and the host repeats the prompts. The
PXE server configuration is not complete until you accept the
settings.
To set up the host as the DHCP server
a) Select no at the prompt. This produces the following series of
prompts:
IP network [10.1.10]?
IP address of server 10.1.10[n] [199]?
Lower range for clients 10.1.10.[n] [199]?
Upper range for clients 10.1.10.[n] [200]?
b) If your subnet is private, accept the default IP addresses
provided. If other machines share the subnet, and possible
conflict exists, substitute appropriate unique addresses and
ranges.
The host displays the settings you selected, and prompts you to
accept or reject them.
c) If the settings are correct, type yes to accept them. If the settings
are not correct, type no and the host repeats the prompts. The
PXE server configuration is not complete until you accept the
settings.