Personal Computer User Manual


Table A-1.SystemBoardJumperSettings

System Board Connectors

See FigureA-3 and TableA-2 for the location and description of system board connectors. FigureA-3 also indicates expansion slots and bus operating speeds.
Figure A-3. System Board Connectors

Jumper
Setting
Description
J11 pins 1 and
2

(default)
The password feature is enabled.

The password feature is disabled.
J11 pins 3 and
4

(default)
The configuration settings in NVRAM are retained at system boot.

The configuration settings in NVRAM are cleared at next system boot (see "Resetting Corrupted BIOS Configuration" in
"Troubleshooting Your System").
 jumpered unjumpered