Owner's Manual

Installing Options 79
Removing the Memory
1 Follow steps 1 and 2 on page 76 to access the control board.
2 Push the levers at both ends of the DIMM slot away from the DIMM.
3 Place the DIMM in its original packaging or wrap it with paper and store it in a box.
4 Follow from step 8 on page 78.
Installing an Optional Tray 2
You can increase the paper handling capacity of your multi-function printer by installing an
optional Tray 2. This tray holds 250 sheets of paper.
1 Power the multi-function printer off and unplug all cables from the multi-function
printer.
2 Remove the packing tape and the tape fastening the interface cable from the bottom
of the optional Tray 2.