Specifications

Precautions
Service Manual
5-21
5.18 Feed Ass'y
1. Before you remove the Feed Ass'y, you should
remove:
- Rear Cover (see page 5-2)
- Side Cover (LH, RH) (see page 5-3)
- Scanner Ass’y (see page 5-5)
- Front Cover (see page 5-4)
- Middle Cover (see page 5-11)
- Drive Ass’y (see page 5-18)
- Controller Shield Ass’y (see page 5-12)
2. Remove the 4 screws securing the Guide Paper Front
and remove it.
3. Remove the screws on the right and left sides of the
guide paper to remove it as well as the spring as
below.
4. Remove the 3 screws securing the Feed Bracket and
remove it.
5. Remove the Feed Gear2.
Guide Paper
Front
Feed Bracket
Feed Gear2
Screw
Guide Paper
Spring