Specifications

Precautions
Service Manual
5-15
5.12 Fuser Ass'y
1. Before you remove the Fuser Ass'y, you should
remove:
- Rear Cover (see page 5-2)
2. Unplug the two connectors from the Main PBA and
SMPS, as shown below. Then remove the 4 screws
securing the Fuser Ass'y and remove it.
3. Remove the 2 screws securing the Thermostat. Then
lift the Thermostat out
4. Remove the 2 screws securing the Halogen Lamp.
Then take out the Halogen Lamp from the Heat Roller
5. Remove the 4 screws to remove the fuser cover as
below. Remove the 2 screws to remove the guide
input..
Fuser Cover
Claw
Fuser Ass’y
Heat Roller
Halogen Lamp
guide Input
Thermostat