Specifications

Service Manual
Precautions
5-12
1. Before you remove the Main PBA, you should
remove:
- Rear Cover (see page 5-2)
- Side Cover(LH, RH) (see page 5-3)
2. Remove the 8 connectors and the 5 screws connect-
ing the Controller Shield Assembly to Middle Cover
the frame and remove the assembly.
3. Remove the 2 screws connecting the NIC card to the
Controller Shield Assembly and remove the card.
4. Remove the 2 screws connecting the LIU to the
Controller Shield Ass'y and remove the LIU.
5. Remove the 3 screws to remove the bracket from the
main board.
5.9 Controller Shield Ass’y
Controller Shield Ass’y
NIC Card
Main Board
Bracket
LIU