Owner`s manual

a) battery

b) base cover

3. Perform the following steps:

a) Disconnect the coin-cell battery cable from the system board.

b) Pry and remove the coin-cell battery from the adhesive.

Installing the Coin-Cell Battery

1. Place the coin-cell battery on the system board with adhesive side downwards.

2. Connect the coin-cell battery cable to the system board.

3. Install:

a) base cover

b) battery

4. Follow the procedures in

After Working Inside Your Computer

Removing the Display Hinge

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a) battery

b) base cover

c) keyboard trim

d) keyboard

3. Perform the following steps:

a) Remove the screws that secure the display hinge at the front and back of the computer.

b) Lift and remove the display hinge from the computer.