Owner`s manual

Installing the Hard Drive

1. Place the hard-drive bracket on the hard drive and tighten the screws to secure the hard-drive

bracket to the hard drive.

2. Place the hard drive on its connector.

3. Install:

a) base cover

b) battery

4. Follow the procedures in

After Working Inside Your Computer

Removing the Hard-Drive Cage

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a) battery

b) base cover

c) hard drive

3. Perform the following steps:

a) Remove the screws that secure the hard-drive cage in place.

b) Pull the hard-drive cage to remove from the computer.