Owner`s manual

Installing the Memory Module

1. Insert the memory into the memory socket.

2. Press the clips to secure the memory module to the system board.

3. Install:

a) base cover

b) battery

4. Follow the procedures in

After Working Inside Your Computer

Removing the Hard Drive

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a) battery

b) base cover

3. Perform the following steps:

a) Remove the screws that secure the hard drive in place.

b) Pull the hard drive to remove from its connectors.

4. After removing the hard drive, perform the following steps:

a) Remove the screws that secure the hard-drive bracket.

b) Remove the hard-drive bracket from the hard drive.