User guide

90 Understanding the Tool Box Menus
To print the settings and history information of your printer.
The reports are printed in the paper size specified in printer settings. The
default is A4 or Letter.
Val ue s:
Printer Maintenance
The Printer Maintenance tab contains the System Settings, Paper Density,
Adjust BTR, Adjust Fuser, Color Registration Adjustment, Adjust Altitude,
Reset Defaults, Non-Dell Toner, and BTR Refresh Mode pages.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
System Settings
Purpose:
To configure the power saving mode, time-out time, job log auto print, mm/
inch setting, default paper size setting, and low toner alert message setting.
Val ue s:
Printer Settings Click to print a detailed list of the printer settings.
Device Settings Click to print a detailed list of the device settings.
Job History Click to print the completed jobs history.
Error History Click to print the error history.
Color Test Page Click to print a color test page.
Sleep
*1
5 minutes
*
Specifies the time taken by the
printer before it enters Sleep
mode after it finishes a job.
5–30 minutes
Deep Sleep 6 minutes
*
Specifies the time taken by the
printer before it enters Deep
Sleep mode after it goes into
Sleep mode.
1–6 minutes