User guide
Table Of Contents
- Before Beginning
- Setting Up Printer (Printer Setup)
- Using Your Printer
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Maintaining Your Printer
- Troubleshooting
- Troubleshooting
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off/Stain on back side
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Pitched color dots
- Vertical blanks
- Mottle
- Ghosting
- Fog
- Bead-Carry-Out (BCO)
- Auger mark
- Wrinkled/Stained paper
- The top margins is incorrect
- Color registration is out of alignment
- Protrudent / Bumpy paper
- Noise
- Jam
- Other Problems
- Contacting Service
- Troubleshooting
- Appendix
- Index
76 Operator Panel
Fatal Errors
Contact Dell if this error occurs repeatedly. See "Contacting Dell" on
page 164.
Firmware Errors
Contact Dell if this error occurs repeatedly. See "Contacting Dell" on
page 164.
1 2 3 4 5 7 8 Cause/Remedy
Jam Toner Error Ready/
Data
Start Manual
Duplex
Load
Paper
- - - - - - A fatal error occurred.
Turn off the printer, and then
on.
1 2 3 4 5 7 8 Cause/Remedy
Jam Toner Error Ready/
Data
Start Manual
Duplex
Load
Paper
YMC K
- - - - - - A firmware error occurred.
Press the (Cancel) button
to clear the error.
See "Canceling a Print Job
" on
page 80.
- - - - - A ROM erasing error occurred.
Turn off the printer, and then
on.
- - - - A ROM writing error occurred.
Turn off the printer, and then
on.