User guide
Table Of Contents
- Before Beginning
- Setting Up Printer (Printer Setup)
- Using Your Printer
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Maintaining Your Printer
- Troubleshooting
- Troubleshooting
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off/Stain on back side
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Pitched color dots
- Vertical blanks
- Mottle
- Ghosting
- Fog
- Bead-Carry-Out (BCO)
- Auger mark
- Wrinkled/Stained paper
- The top margins is incorrect
- Color registration is out of alignment
- Protrudent / Bumpy paper
- Noise
- Jam
- Other Problems
- Contacting Service
- Troubleshooting
- Appendix
- Index
Operator Panel 75
Secondary light sequences
When the Error indicator blinks, a secondary error has occurred. Press and
hold the (Start) button to display the secondary error light sequences.
1 2 3 4 5 7 8 Cause/Remedy
Jam Toner Error Ready/
Data
Start Manual
Duplex
Load
Paper
YMC K
---- - - Memory overflow
Press the (Cancel) button
to clear the message and
cancel the current print job.
See "Canceling a Print Job" on
page 80.
- - - - - - PDL (Page Description
Language) error
Press
the
(Cancel) button
to clear the message and
cancel the current print job.
See "Canceling a Print Job" on
page 80.
- - - - - - Invalid job environment
The configuration of the
printer set on the printer driver
does not match the
configuration of your printer.
Press the (Cancel) button
to cancel the current print job.
See "Canceling a Print Job" on
page 80.