User guide
Table Of Contents
- Before Beginning
- Setting Up Printer (Printer Setup)
- Using Your Printer
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Maintaining Your Printer
- Troubleshooting
- Troubleshooting
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off/Stain on back side
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Pitched color dots
- Vertical blanks
- Mottle
- Ghosting
- Fog
- Bead-Carry-Out (BCO)
- Auger mark
- Wrinkled/Stained paper
- The top margins is incorrect
- Color registration is out of alignment
- Protrudent / Bumpy paper
- Noise
- Jam
- Other Problems
- Contacting Service
- Troubleshooting
- Appendix
- Index
Operator Panel 73
Operator Call Errors
The following table shows the location where an error occurred. Operator call
errors require some kind of intervention to resolve the problem.
1 2 3 4 5 7 8 Printer Status
Jam Toner Error Ready/
Data
Start Manual
Duplex
Load
Paper
YMC K
- --- -
*1
- - - The yellow toner is low.
*2
-- ---
*1
-- -The magenta toner is low.
*2
--- --
*1
- - - The cyan toner is low.
*2
---- -
*1
-- -The black toner is low.
*2
--
*1
- - - The printer is in the non-Dell
toner mode.
- --- -
*1
- - - The yellow toner is empty.
*3
-- ---
*1
- - - The magenta toner is empty.
*3
--- --
*1
- - - The cyan toner is empty.
*3
*1
The Ready/Data indicator blinks or lights up green depending on the printer status.
*2
This warning appears only when Dell toner cartridges are used (Non-Dell
Toner is set to Off).
*3
In this case, you can continue printing in black and white.