User guide
Table Of Contents
- Before Beginning
- Setting Up Printer (Printer Setup)
- Using Your Printer
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Maintaining Your Printer
- Troubleshooting
- Troubleshooting
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off/Stain on back side
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Pitched color dots
- Vertical blanks
- Mottle
- Ghosting
- Fog
- Bead-Carry-Out (BCO)
- Auger mark
- Wrinkled/Stained paper
- The top margins is incorrect
- Color registration is out of alignment
- Protrudent / Bumpy paper
- Noise
- Jam
- Other Problems
- Contacting Service
- Troubleshooting
- Appendix
- Index
72 Operator Panel
Warnings
The following table shows the warning conditions. You can continue printing
even though the warning appears.
1 2 3 4 5 7 8 Printer Status
Jam Toner Error Ready
/Data
Start Manual
Duplex
Load
Paper
--- - - -
Ready
--- - - -
Processing
--- - - -
Printing
--- - - -
Canceling
--- - - -
Calibrating
--- - - -
Warmi ng up
--- - - -
Waiting for incoming data
--- - - -
Initializing NVM
--- - - -
On Diagnosis when starting
--- - - -
In power saver mode
--- -
Waiting for manual duplex
printing.
*1
*1
Load paper for the second side (odd) pages, and press the
(Start) button . See
"Manual Duplex Printing (Windows Printer Driver Only)" on page 81.