User guide
Table Of Contents
- Before Beginning
- Setting Up Printer (Printer Setup)
- Using Your Printer
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Maintaining Your Printer
- Troubleshooting
- Troubleshooting
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off/Stain on back side
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Pitched color dots
- Vertical blanks
- Mottle
- Ghosting
- Fog
- Bead-Carry-Out (BCO)
- Auger mark
- Wrinkled/Stained paper
- The top margins is incorrect
- Color registration is out of alignment
- Protrudent / Bumpy paper
- Noise
- Jam
- Other Problems
- Contacting Service
- Troubleshooting
- Appendix
- Index
Operator Panel 69
11
Operator Panel
Using the Operator Panel Buttons
The operator panel has two buttons and several indicators that show the
status of the printer.
1
(Jam)
indicator
• Indicates that a paper jam occurred or the rear cover is open.
2
(Toner)
indicator
• Indicates that the toner is low or empty, or toner error occurred.
3
(Error)
indicator
• Indicates that an error occurred.
4
(Ready/Data)
indicator
• Indicates the printer status, such as receiving and printing data.
5
(Start)
button/indicator
• Press this button to start duplex printing after loading paper.
• Press and hold this button to print the Report pages.
1
4
2
3
5
5