User guide
Table Of Contents
- Before Beginning
- Setting Up Printer (Printer Setup)
- Using Your Printer
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Maintaining Your Printer
- Troubleshooting
- Troubleshooting
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off/Stain on back side
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Pitched color dots
- Vertical blanks
- Mottle
- Ghosting
- Fog
- Bead-Carry-Out (BCO)
- Auger mark
- Wrinkled/Stained paper
- The top margins is incorrect
- Color registration is out of alignment
- Protrudent / Bumpy paper
- Noise
- Jam
- Other Problems
- Contacting Service
- Troubleshooting
- Appendix
- Index
Print Media Guidelines 57
Supported Paper Types
DL LEF (220x110 mm)*
1
Y
Letter (8.5x11 in)
Y
Legal (8.5x14 in)
Y
Folio (8.5x13 in)
Y
Executive (7.25 x 10.5 in)
Y
Custom*
2
*
3
Y
*
1
You can place the originals in a long-edge feed direction or in a short-edge
feed direction. The following illustration shows SEF and LEF. The arrow mark
in the illustration shows the orientation of the paper loading.
NOTE: Not available when the XPS Printer Driver is used.
*
2
Custom width: 76.2 mm (3.00 inches) to 215.9 mm (8.50 inches)
The maximum width for envelope (DL LEF): 220 mm (8.66 inches)
Custom length: 127 mm (5.00 inches) to 355.6 mm (14.00 inches)
The maximum length for envelope (Monarch LEF): 98.4 mm
*
3
Only the administrator user can set the custom size from the printer driver.
Media Multipurpose Feeder (MPF)
Plain
Y*
Plain Side 2
Y
Plain Thick
Y
Plain Thick Side 2
Y
Multipurpose Feeder (MPF)
LEFSEF