User guide
Table Of Contents
- Before Beginning
- Setting Up Printer (Printer Setup)
- Using Your Printer
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Maintaining Your Printer
- Troubleshooting
- Troubleshooting
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off/Stain on back side
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Pitched color dots
- Vertical blanks
- Mottle
- Ghosting
- Fog
- Bead-Carry-Out (BCO)
- Auger mark
- Wrinkled/Stained paper
- The top margins is incorrect
- Color registration is out of alignment
- Protrudent / Bumpy paper
- Noise
- Jam
- Other Problems
- Contacting Service
- Troubleshooting
- Appendix
- Index
About the Printer 25
Space Requirements
Place the printer at a location such that there is adequate space for using the
printer feeder and covers.
To avoid irregular screen image or malfunctioning of your printer, avoid
placing the printer in direct sunlight with the front cover opened.
69 mm/2.7 inches
225 mm/
8.9 inches
300 mm/11.8 inches
329.5 mm/13 inches
307 mm/12.1 inches
394 mm/
15.5 inches
295.5 mm/
11.6 inches
100 mm/
3.9 inches