User guide
Table Of Contents
- Before Beginning
- Setting Up Printer (Printer Setup)
- Using Your Printer
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Maintaining Your Printer
- Troubleshooting
- Troubleshooting
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off/Stain on back side
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Pitched color dots
- Vertical blanks
- Mottle
- Ghosting
- Fog
- Bead-Carry-Out (BCO)
- Auger mark
- Wrinkled/Stained paper
- The top margins is incorrect
- Color registration is out of alignment
- Protrudent / Bumpy paper
- Noise
- Jam
- Other Problems
- Contacting Service
- Troubleshooting
- Appendix
- Index
Troubleshooting 153
The top margins is incorrect
3b Load the envelope long edge feed in the MPF
with the flap open and facing up. For details,
see "When Loading Envelope#10, DL, or
Monarch" on page 64.
Is the problem recovered?
The task is
complete.
Go to action
4b.
4a Load the envelope in the MPF with the flap
open and facing up. For details, see "When
Loading C5" on page 64.
Is the problem recovered?
The task is
complete.
Contact Dell.
4b Use a different size envelope.
Is the problem recovered?
The task is
complete.
Contact Dell.
Action Yes No
1 Ensure that the margins are set correctly on the
application being used.
Is the problem recovered?
The task is
complete.
Contact Dell.
Action Yes No