User guide
Table Of Contents
- Before Beginning
- Setting Up Printer (Printer Setup)
- Using Your Printer
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Maintaining Your Printer
- Troubleshooting
- Troubleshooting
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off/Stain on back side
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Pitched color dots
- Vertical blanks
- Mottle
- Ghosting
- Fog
- Bead-Carry-Out (BCO)
- Auger mark
- Wrinkled/Stained paper
- The top margins is incorrect
- Color registration is out of alignment
- Protrudent / Bumpy paper
- Noise
- Jam
- Other Problems
- Contacting Service
- Troubleshooting
- Appendix
- Index
108 Understanding Your Printer Software
4
Order Supplies button
Click this button to display the
Order
window.
This window provides you with the information for ordering printer
supplies by telephone or from the web site.
NOTE: The Order window automatically appears when low toner is detected.
Printer Displays a list of available printer names in the
drop-down list. The first printer displayed in this
list is set as default.
Status Update Interval You can update the interval of the printer status.
By default, it is set to obtain the printer
information every 10 seconds. The range varies
between 0 and 600.
SNMP Community Name You can change the SNMP (Simple Network
Management Protocol) community name if using
default community name (public). Up to 31
characters can be entered.
Service Tag button
*1
done button Click this button to return to the Printer Status
window.
*1 This item is only available for the network printer.