Owner`s manual

28 | Removing the Fan
Removing the Fan
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 9. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 10.
2 Remove the battery. See "Removing the Battery" on page 13.
Procedure
1 Disconnect the I/O-board cable from the I/O board and system board, and lift the
cable away from the computer.
2 Note the coin-cell-battery cable routing and remove the cable from the routing
guides.
3 Disconnect the fan cable from the system-board connector.
4 Remove the screws that secure the fan to the keyboard.
1I/O-board cable
1
book.book Page 28 Tuesday, October 23, 2012 12:44 AM