Sensor Cleaning Guide

that adhesion and wipe the contaminant away. Delkin has developed size-specific
SensorSafe Wands and SensorSolution to address wet contaminants and safely remove
them from your sensor’s surface. These are included as a part of the SensorScope
System, as well as the Refill Kits that are size specific and match your specific sensor
size.
The Surface is Clean, but Did You Check Your Edges?
You’ve swiped your sensor’s surface with the SensorSafe Wands and
the surface looks clean, so now it’s time to check your edges! A
quick look with the SensorScope will show you if there’s any
remaining debris along the sensor’s edges that needs to be
removed, and Delkin’s SensorPen by LensPen is made specifically to
do the job. A few quick twists of the cap will ready your SensorPen
for cleaning, and the triangulated tip is designed to reach those
hard-to-get-to edges and provide a final polish.
Congratulations, You’re Ready to Shoot!
One final look with your SensorScope to make sure that your sensor is clean, and you’re
ready to power your DSLR down (this will release the mirror lock-up), reattach your
lens, and head out to your shoot.
Delkin Devices invented the first DSLR sensor inspection device and continues to hold
the patents on DSLR sensor inspection. They offer the SensorScope inspection device
separately, or as a part of a complete kit that includes everything you need to safely
and quickly inspect and clean your DSLR image sensor. Refill kits are also available that
provide additional SensorSafe Wands, SensorSolution, and a SensorPen.
SensorScope System
SensorScope Inspection Device
Refill Kit for Small Frame 16mm Sensors
Refill Kit for Medium Frame 20mm Sensors
Refill Kit for Large Frame 24mm Sensors