Specifications
15
Specication Line
The Heated units have a POWER ON/OFF switch located behind
the flip up shroud at the front top of the unit for controlling power
to the unit and an electronic thermostat for setting the tempera-
ture. A circulating fan provides uniform airflow in the cabinet.
Power Up
1. Check that unit is properly connected to the power source.
2. Raise the shroud to access the controls.
3. Set the Main POWER ON/OFF switch, to the ON position.
4. Set the NIGHT switch to the ON position.
5. Adjust the electronic thermostat to the desired temperature.
6. Allow unit to warm-up before use.
The unit surface is very hot! Avoid direct contact
with skin; use appropriate protective apparel, such
as gloves.
Power Down
1. Turn the unit off daily by setting the NIGHT switch to the
OFF position
2. After use, allow unit to cool down.
3. If desired, set the Main POWER ON/OFF switch to the OFF
position.
4. Clean equipment as discussed in the MAINTENANCE section
of this manual.
Heated Cabinet Operation