Installation manual

F5 & F15 Series Service and Installation Manual
17
For customer service, call [phone], [phone], Fax [phone], www.deleld.com
Delfield
™
®
Standard Labor Guidelines To Repair Or Replace Parts On Delfield Equipment
Advice and recommendations given by Delfield Service Technicians do not constitute or guarantee any special coverage.
• A maximum of 1-hour is allowed to diagnose a defective component.
• A maximum of 1-hour is allowed for retrieval of parts not in stock.
• A maximum travel distance of 100 miles round trip and 2-hours will be reimbursed.
• Overtime, installation/start-up, normal control adjustments, general maintenance, glass breakage, freight damage, and/or
correcting and end-user installation error will not be reimbursed under warranty unless pre-approved with a Service Work
Authorization from Delfield. You must submit the number with the service claim.
Labor Of 1-Hour Is Allowed To Replace:
• Ballast/Light
• Circulating Fan Motor and Blade
• Compressor Start Components and Overload Protector
• Condensate Element
• Door Hinges, Locks, and Gaskets
• Evaporator/Condenser Fan Motor and Blade
• Hi-limit/Thermal Protector Switch
• ON/OFF Switch
• Solenoid Coil
• Springs
• Thermostat
Labor Of 2 Hours To Replace:
• Locate/Repair Leak
• Pressure Control
• Solenoid Valve
Labor Of 3 Hours To Replace:
• Condenser or Evaporator Coil
• Expansion Valve
Labor Of 4 Hours To Replace:
• Compressor
This includes recovery of refrigerant and leak check.
$55.00 maximum reimbursement for refrigerant recovery (includes recovery machine, pump, torch, oil, flux, minor fittings,
solder, brazing rod, nitrogen, or similar fees.)
Refrigerants:
• R404A A maximum of $15.00/lb. or $1.00/oz. will be reimbursed.