Installation Sheet

Distance between two holes on the track
Distance between
hole to the track edge
L1=width of door opening
L2=width of door panel
L3=distance from door opening edge to track edge
L4=distance from door panel edge to the middle of trigger
L4=150-L3+(L2-L1)/2(left side is the same)
Bumper position
Right
Left
Distance between two holes on the track
Distance between
hole to the track edge
(Soft closing function for both sides or either side)
Both or Either
Trigger position
Right(example)
BARN DOOR SOFT CLOSE ASSEMBLY INSTRUCTIONS
*Install prior to track being mounted
1/2
1/2
1/2"
5"
6 3/8"
1 1/4"
9/16"