Installation Guide

Left-handed Right-handed
Hardware Used
8
L
Deadbolt chassis screws x2
15
16
14. Install Assembly
Pass the IC wire under the latch (D) to the
interior side of the door, and insert the
tailpiece through the cross-shaped crank
of the latch
Touchpad
.
15. Install Inside Mounting Plate
Pass the IC wire through the wire hole of the
mounting plate (F). Fix the mounting plate (F)
with screws (L). If outside lock assembly is
lopsided, please loosen the screws to adjust
its position and tighten the screws again.
16. Identify Door Handing
Face the door from the outside. The
door is left-handed if the hinges are
on the left side of the door, whereas
the door is right-handed if the hinges
are on the right side of the door.
L
F
ASSEMBLY INSTRUCTIONS
Hinge Hinge
horizontal position
14
D
C
B
IC wire