Installation Instructions

www.deks.com.au
A Skellerup Industries Company
Selection Guide
Need to flash a tiled roof? Contact DEKS to discuss the tile roof flashing range.
A
Installation Information
Please Note
vailable in Black and Grey EPDM or Red Silicone
E
That the outside temperature of the pipe may be significantly different to the exit temperature of the appliance.
PDM will withstand constant temperatures at the roofline of -50°C (-58°F) to 115°C (239°F) and up to 150°C (302°F) intermittently
Red Silicone will withstand constant temperatures at the roofline of -50°C (-58°F) to 200°C (392°F) and up to 250°C (482°F) intermittently
DEKTITE RETROFIT GREY EPDM
DEKTITE ORIGINAL RED SILICONE
1
C ut Dektite
at appropriate
pipe diameter
marking.
®
2
S lide Dektite
flas hing down
over pipe.
3
App ly s ealant on
unders ide of
flexible aluminum
bas e.
4
Pres s Dektite
bas e into contours
of panel
c onfiguration.
5
Fasten Dektite
to su rfac e with
long -life, s elf
drilling fasteners .
App ly additional
sea lant around
bas e if desired.
®
®
®
Always use the neutral cure low modulus silicone for sealing
In corrosive and coastal environments fix using blind aluminium rivets
·
·
Black EPDM
DF100B
DF102B
DF103B
DF104B
DF105B
DF106B
DF107B
DF108B
DF109B
DF100G
DF102G
DF101B DF101G
DF103G
DF104G
DF105G
DF106G
DF107G
DF108G
DF109G
DF200RE
DF202RE
DF201RE
DF203RE
DF204RE
DF205RE
DF206RE
DF207RE
DF208RE
DF209RE
Grey EPDM Red Silicone
Dektite Original #0
Dektite Original #1
Dektite Original #2
Dektite Original #3
Dektite Original #7
Dektite Original #8
Dektite Original #9
Dektite Original #4
Dektite Original #5
Dektite Original #6
mm inch mm inch
DEKS Code Description Pipe OD Base OD Pitch Carton
QTY
0 - 35
5 - 60
45 - 80
5 - 127
75 - 160
108 - 190
125 - 230
150 - 280
175 - 330
254 - 483
40
10
10
10
10
5
5
5
5
1
0-40° or
93
124
162
202
276
238
322
372
422
647
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0 - 1
3
/8”
¼ - 2½”
1¾ - 3¼”
¼ - 5”
3 - 6¼”
4¼ - 7½”
5 - 9”
6 - 11”
7 - 13”
10 - 19”
”3
3
/4
4
3
/
4 ”
1
/2
6 ”
8 ”
1
/2
9 ”
11 ”
3
/4
12 ”
”25
½
3
/4
14 ”
3
/4
16 ”