Use and Care Manual

Step 10: Add Flooring
To begin laying flooring start at the corner of the room and lay plank-by-plank on top of underlayment until you
reach the opposite wall. Each row should have no gaps in joints. Once your first row is complete start on the
next row. Please note the joints in the flooring should not line up from one row to the next. This will help
prevent the flooring from separating over time. Continue to lay rows of flooring until you are getting near the
edge of underlayment. When this happeneds lay your next row of underlayment. Be sure to acclimate your
flooring 48 hours before the installation.
Step 11: Keep Going
Install your flooring plank by plank on top of the underlayment. Continue until your project is finished.
That’s all. It is not complicated, right? Installing flooring yourself can save you 25-50% on your installation
project, so on an average, a 500 square feet laminate flooring project can save you approximately $500-$750.
Nice reward for your hard work, right? Aha, one more thing, don’t forget to take pictures, tons of pictures.
Please share your pictures by emailing them to: [e-mail].
If you have additional tips please share them with us.
Dekorman Inc. 189 Gentry Street, Pomona, CA 91767; Tel: [phone]; [e-mail]