Installation Guide

GENERAL & INSTALLATION INSTRUCTIONS 2G+5G (RT)
Name Date modified/printed File Doc.no Rev. Page
Svante BERNOW 14-04-30/ 14-04-30 2G+5G [Doc.no] 080908 5(9)
Fig 3.
Fold the panel down in a single action movement.
During the fold down, make sure the panels are tight
against each other.
Afterwards press or slightly knock at the short end
just installed.
Fig 4.
At the end of the first row, put a distance
≈ 10 mm, to the wall and measure the length of the
last plank to fit.
Fig 5.
Cut with a jig saw - hardwood turned down or
with a hand saw with the hardwood visible.