Specifications

ManualsBrandsDekor Lighting ManualsAll Landscape LightingEZ Yard Dot Plug-In LED Pathway Light Pack

HELPFUL TIPS

Follow the appropriate building and electrical codes when

installing all DEKOR

lighting products.

» Leave wire slack to make xture terminations.

» We recommend determining light placement under dark

conditions prior to drilling/installing.

» DO NOT use more than one transformer per circuit.

» To ensure all components and connections are functional, we

recommend having your power source attached and on when

installing lights.

Polarity Key

CAUTION:

When making a connecon between

a Plug-N-Play connector or splier,

observe the polarity key to make a proper connecon.

The male and female connectors have a ﬂat side that

MUST MATCH UP. Do not force the connectors together.

Plug-N-Play connectors are waterproof, but use of dielelectric

grease is mandatory for any connecon with constant exposure

to water. Dielectric grease should be added prior to connecon.

DEKOR

EZ Yard Dot Installaon Guide

Have Quesons? Call 1.800.258.0344 or visit us at DEKORLIGHTING.COM

DEKOR

EZ Yard Dots allow you to add low-proﬁle ground lighng to grass, mulch, gravel, and other so landscaping elements. These

robust lights are designed to handle the elements, will not rust, and use a UV-stable polycarbonate lens to protect the LEDs that will

not yellow with age. They are compable with the DEKOR

Plug-N-Play system, and come ready to install with direct-bury cables.

For more informaon call 1.800.258.0344, or connect to our responsive chat messenger at dekorlighng.com.

Note: Construcon methods are constantly changing. For the most up-to-date instrucons, please visit us at dekorlighng.com

HOUSE

EZ YARD DOT

w/ 3 connectors

Timer and

Transformer

Outdoor

Power

Source

PATH

EZ YARD DOT

w/ 2 connectors

EZ YARD DOT

w/ 2 connectors

TREE

STREET

Tip: Allow a few inches at the end of each

cable at the connecon points to easily cover

the cable with grass, dirt, or ground cover.

Recommended Tools:

• Small Shovel

• Rubber Mallet

• Iron Spike (oponal)

The sample installaon below is based on a standard Outdoor Kit. Addional lights can be added to your installaon by purchasing

4-packs of EZ Yard Dots. Do not install more lights than can be supported by your transformer - please see the chart on page 2.

Summary of content (2 pages)

PAGE 1
DEKOR® EZ Yard Dot Installation Guide DEKOR® EZ Yard Dots allow you to add low-proﬁle ground lighting to grass, mulch, gravel, and other soft landscaping elements. These robust lights are designed to handle the elements, will not rust, and use a UV-stable polycarbonate lens to protect the LEDs that will not yellow with age. They are compatible with the DEKOR® Plug-N-Play system, and come ready to install with direct-bury cables. For more information call 1.800.258.
PAGE 2
DEKOR® EZ Yard Dot Installation Guide PLANNING: Prior to installation, ﬁnd locations for your transformer, timer, and dimmer if applicable. These need to be accessible. A GFCI outlet is required to help prevent damage to lights due to electrical incidents. » Plug the timer into a GFCI outlet located in a dry area. » The timer must be installed vertically with the receptical facing down. » If using an EZ Photocell Timer, make sure the timer is located somewhere that sees daylight.