User Manual

Table Of Contents
Dekolink WIRELESS Ltd.
16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510
Tel- 972-3-9180-180 Fax-972-3- 190-9180
e-mail: marketing@dekolink.com
web www.dekolink.com
The RFiber+
TM
main features are:
1. Protocol transparency; i.e. any standard can be faithfully transmitted.
2. An optional serial port (RS232) is installed into each unit. This port allows
data communication over the same fiberoptic cable.
3. Max. input RF power for normal operation – 0dBm.
4. Manual Gain Control is standard in receiver to compensate for optical loss
across the fiber.
The following drawings show sample front and rear panels of the RFiber+
TM
unit
Fig. 2 : - RFiber+
TM
Front Panel
Fig. 3 : - RFiber+
TM
Rear Panel
On the Front Panel of the RFiber+
TM
unit (Fig 2.) are three LEDs. The LEDs should be
on when the unit is in use. The following table describes the LEDs.
Rev1 12/03 Page 6 of 17