User's Manual

Page 5 of 21
IDEN Digital Repeater Installation
Manual
4 Electrical Specifications
Frequency Range Downlink 851-866 MHz Uplink 806-821 MHz
Pass band Gain @Min attenuation. Up to 100 dB
Channel Bandwidth See Sample from Table
Channel Setting Resolution 0.5 kHz
Passband Ripple ± 2.5 dB max
Channel Ripple ± 0.5 dB max
Delay Ripple ± 250 nSec max
Noise Figure @max gain 5.0 dB max
3rd Order Output Intercept Point +62 dBm typical +50 dBm typical
IMD @ 4 tone
48 dBc typical
@ 2.5 Watt/tone
48 dBc typical
@ 0.25 Watt/tone
IMD @ 8 tone
45 dBc typical
@ 1.25 Watt/tone
45 dBc typical
@ 0.125 Watt/tone
Power Output @1 dB Gain Compression 50 Watt 10 Watt
Composite Output Power +40dBm +30 dBm
Automatic Gain Control (user enable) 15 dB attenuation Range
Impedance Level 50 ohms
V.S.W.R In/Out 1.5: 1 max
Spurious Outputs -13dBm max
Power Supply 90 to 260 VAC
Digital Gain Control 0-31dB@1dB/step
Size 400X600X300 cm (15.7x23.6x12 inch)
RF Connectors N-type Female
Weight 40 kg. (90 lb) Approx.
Operating temperature
- 30°C to + 50°C
Controller Backup Battery 2 Hours Appox.