User's Manual

PRODUCT MANUAL DEKO4078SD MULTI-CHANNEL SIGNAL BOOSTER DEKOLINK WIRELESS LTD.
P/N 300SC30031 Rev. 1.2 Proprietary Data Page 73
FPGA ROUTE
The Deko4078SD MT application enables further narrowing down the signal passed
for each channel. This option is performed via the FPGA Route parameter, which
processes the signal via the DSPA.
To define the FPGA Route Parameter
1. Access the Routing tab of the DDF window.
2. Click CTRL+A to access the
Advanced mode.
3. Click the FPGA Route parameter to be defined corresponding to required channel
and select one of the following options from the drop-down list:
• Normal – Signal is passed “as is”
• CW – Booster can be used to generate the signal
• Zero – No signal
4. Click the Send Parameters button.
FPGA Route