User's Manual

PRODUCT MANUAL DEKO4078SD MULTI-CHANNEL SIGNAL BOOSTER DEKOLINK WIRELESS LTD.
P/N 300SC30031 Rev. 1.2 Proprietary Data Page 33
The following table provides a description of the parameters displayed in the
Advanced-Installation field areas.
Field Area Parameter Description
General In Path Offset (dBm) The attenuation measured (per
domain – DL700/DL800/UL) between
the Input antenna to the DMSB
Signal Booster
Out Path Offset (dBm) The attenuation measured (per
domain – DL700/DL800/UL) between
the output of the DMSB Signal
Booster to the antenna
System de attach time (msec) Determines the amount of time the
channel remains open after the
transmission has ended
Power Save (msec) Determines the amount of time
(msec) after which the filter P.Amp is
muted if it is not active.
Note: The mute is immediately
released once the filter resumes
being active.
Input
Window
Attack Time (µsec)
Attack time for sliding window
Attack Steps (dB) Attack steps in dB increments for
Attack time
Release Time (sec) Release time for sliding window
Release Steps (dB) Release steps in dB increments for
Release time
Marker Tone,
PL Mode
Marker Tone Period (msec) Duration (msec) of the CW – signal
generated by the signal booster for
the ID Tone
Marker Tone Frequency (Hz) CW frequency (Hz) for ID Tone
Marker Tone Volume Volume of CW for ID Tone
Time Out Timer (sec) Limits channel occupancy to
configured amount of time
PL Timer (msec) PL (Private line) timer for closing
channel when wrong PL detected